Skip to content 
Technical Specifications:
- Input voltage: 90V – 240V AC +/-10% @ 50Hz
- Current consumption (Mains): 250mA
- Battery charger current output: 1.8A @ 27.4V +/-1%
- Motor voltage: 24V DC
- Motor power supply: Battery-driven (Standard Capacity – 2x 7.2Ah)
- Current consumption (motor at rated load): 9A
- Input / Output sink currents (Max accessory current draw):
- I/O 1-4: 100mA (12/24V)
- I/O 5 and 6: 3A (12/24V) 10sec Pulse
- Motor push force – starting: 52kgf
- Motor push force – rated: 39kgf
- Gate mass – maximum: 2000kg
- Gate length – maximum: 25m
- Gate speed (varies with load): Up to 18m/min
- Manual Override: Lockable lever with key release
- Drive Pinion: 13T Module
- Performance during battery backup (no mains power) with 2x 7.2Ah batteries:
- Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf)
- Solar Operation: The D20 SMART can operate off a solar supply. For assistance, consult your local dealer.
- Ambient Temperature: Specifications are based on a 25°C ambient temperature, with the unit not exposed to direct sunlight.
- Motor Push Force: The specified values are based on a motor push force of less than 50% of the rated (starting and running forces).
- Gate Speed Configuration: Gate opening and closing speeds can be configured to run slower, depending on the requirements of individual installations.
- Battery Capacity: The D20 SMART allows for increasing battery capacity for longer standby times.
- Gate Length: The specifications are based on a 4-meter gate, excluding all accessories.
- Remote Buttons: Multiple buttons per remote can be used.
